/*!*
 *
 *  Copyright (c) Highsoft AS. All rights reserved.
 *
 *!*/
import * as Highcharts from "../highcharts.src";
declare module "../highcharts.src" {
    /**
     * (Highcharts, Highmaps) Options for the cluster data labels.
     */
    interface PlotVectorClusterDataLabelsOptions {
        style?: any;
    }
    /**
     * (Highcharts, Highmaps) Options for layout algorithm. Inside there are
     * options to change the type of the algorithm, gridSize, distance or
     * iterations.
     */
    interface PlotVectorClusterLayoutAlgorithmOptions {
        /**
         * (Highcharts, Highmaps) When `type` is set to `kmeans`, `distance` is
         * a maximum distance between point and cluster center so that this
         * point will be inside the cluster. The distance is either a number
         * defining pixels or a percentage defining a percentage of the plot
         * area width.
         */
        distance?: (number|string);
        /**
         * (Highcharts, Highmaps) When `type` is set to the `grid`, `gridSize`
         * is a size of a grid square element either as a number defining
         * pixels, or a percentage defining a percentage of the plot area width.
         */
        gridSize?: (number|string);
        /**
         * (Highcharts, Highmaps) When `type` is set to `kmeans`, `iterations`
         * are the number of iterations that this algorithm will be repeated to
         * find clusters positions.
         */
        iterations?: number;
        /**
         * (Highcharts, Highmaps) When `type` is set to `undefined` and there
         * are more visible points than the kmeansThreshold the `grid` algorithm
         * is used to find clusters, otherwise `kmeans`. It ensures good
         * performance on large datasets and better clusters arrangement after
         * the zoom.
         */
        kmeansThreshold?: number;
        /**
         * (Highcharts, Highmaps) Type of the algorithm used to combine points
         * into a cluster. There are three available algorithms:
         *
         * 1) `grid` - grid-based clustering technique. Points are assigned to
         * squares of set size depending on their position on the plot area.
         * Points inside the grid square are combined into a cluster. The grid
         * size can be controlled by `gridSize` property (grid size changes at
         * certain zoom levels).
         *
         * 2) `kmeans` - based on K-Means clustering technique. In the first
         * step, points are divided using the grid method (distance property is
         * a grid size) to find the initial amount of clusters. Next, each point
         * is classified by computing the distance between each cluster center
         * and that point. When the closest cluster distance is lower than
         * distance property set by a user the point is added to this cluster
         * otherwise is classified as `noise`. The algorithm is repeated until
         * each cluster center not change its previous position more than one
         * pixel. This technique is more accurate but also more time consuming
         * than the `grid` algorithm, especially for big datasets.
         *
         * 3) `optimizedKmeans` - based on K-Means clustering technique. This
         * algorithm uses k-means algorithm only on the chart initialization or
         * when chart extremes have greater range than on initialization. When a
         * chart is redrawn the algorithm checks only clustered points distance
         * from the cluster center and rebuild it when the point is spaced
         * enough to be outside the cluster. It provides performance improvement
         * and more stable clusters position yet can be used rather on small and
         * sparse datasets.
         *
         * By default, the algorithm depends on visible quantity of points and
         * `kmeansThreshold`. When there are more visible points than the
         * `kmeansThreshold` the `grid` algorithm is used, otherwise `kmeans`.
         *
         * The custom clustering algorithm can be added by assigning a callback
         * function as the type property. This function takes an array of
         * `processedXData`, `processedYData`, `processedXData` indexes and
         * `layoutAlgorithm` options as arguments and should return an object
         * with grouped data.
         *
         * The algorithm should return an object like that: (see online
         * documentation for example)
         *
         * `clusterId` (example above - unique id of a cluster or noise) is an
         * array of points belonging to a cluster. If the array has only one
         * point or fewer points than set in `cluster.minimumClusterSize` it
         * won't be combined into a cluster.
         */
        type?: (string|Function);
    }
    interface PlotVectorClusterStatesHoverOptions {
        /**
         * (Highcharts, Highmaps) The fill color of the cluster marker in hover
         * state. When `undefined`, the series' or point's fillColor for normal
         * state is used.
         */
        fillColor?: Highcharts.ColorType;
    }
    /**
     * (Highcharts, Highmaps) An array defining zones within marker clusters.
     *
     * In styled mode, the color zones are styled with the
     * `.highcharts-cluster-zone-{n}` class, or custom classed from the
     * `className` option.
     */
    interface PlotVectorClusterZonesOptions {
        /**
         * (Highcharts, Highmaps) Styled mode only. A custom class name for the
         * zone.
         */
        className?: string;
        /**
         * (Highcharts, Highmaps) The value where the zone starts.
         */
        from?: number;
        /**
         * (Highcharts, Highmaps) Settings for the cluster marker belonging to
         * the zone.
         */
        marker?: Highcharts.PointMarkerOptionsObject;
        /**
         * (Highcharts, Highmaps) The value where the zone ends.
         */
        to?: number;
    }
    /**
     * (Highcharts, Highstock, Highmaps, Gantt) Options for the series data
     * labels, appearing next to each data point.
     *
     * Since v6.2.0, multiple data labels can be applied to each single point by
     * defining them as an array of configs.
     *
     * In styled mode, the data labels can be styled with the
     * `.highcharts-data-label-box` and `.highcharts-data-label` class names
     * (see example).
     */
    interface PlotVectorDataLabelsOptions {
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) The alignment of the data
         * label compared to the point. If `right`, the right side of the label
         * should be touching the point. For points with an extent, like
         * columns, the alignments also dictates how to align it inside the box,
         * as given with the inside option. Can be one of `left`, `center` or
         * `right`.
         */
        align?: (Highcharts.AlignValue|null);
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) Alignment method for data
         * labels. If set to `plotEdges`, the labels are aligned within the plot
         * area in the direction of the y-axis. So in a regular column chart,
         * the labels are aligned vertically according to the `verticalAlign`
         * setting. In a bar chart, which is inverted, the labels are aligned
         * horizontally according to the `align` setting. Applies to cartesian
         * series only.
         */
        alignTo?: string;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) Whether to allow data labels
         * to overlap. To make the labels less sensitive for overlapping, the
         * dataLabels.padding can be set to 0.
         */
        allowOverlap?: boolean;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) Enable or disable the
         * initial animation when a series is displayed for the `dataLabels`.
         * The animation can also be set as a configuration object. Please note
         * that this option only applies to the initial animation.
         *
         * For other animations, see chart.animation and the animation parameter
         * under the API methods. The following properties are supported:
         *
         * - `defer`: The animation delay time in milliseconds.
         */
        animation?: (boolean|Highcharts.PlotVectorDataLabelsAnimationOptions|Partial<Highcharts.AnimationOptionsObject>);
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) The background color or
         * gradient for the data label. Setting it to `auto` will use the
         * point's color.
         */
        backgroundColor?: Highcharts.ColorType;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) The border color for the
         * data label. Setting it to `auto` will use the point's color. Defaults
         * to `undefined`.
         */
        borderColor?: Highcharts.ColorType;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) The border radius in pixels
         * for the data label.
         */
        borderRadius?: number;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) The border width in pixels
         * for the data label.
         */
        borderWidth?: number;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) A class name for the data
         * label. Particularly in styled mode, this can be used to give each
         * series' or point's data label unique styling. In addition to this
         * option, a default color class name is added so that we can give the
         * labels a contrast text shadow.
         */
        className?: string;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) This options is deprecated.
         * Use style.color instead.
         *
         * The text color for the data labels. Defaults to `undefined`. For
         * certain series types, like column or map, the data labels can be
         * drawn inside the points. In this case the data label will be drawn
         * with maximum contrast by default. Additionally, it will be given a
         * `text-outline` style with the opposite color, to further increase the
         * contrast. This can be overridden by setting the `text-outline` style
         * to `none` in the `dataLabels.style` option.
         *
         * @deprecated 10.3.0
         */
        color?: Highcharts.ColorType;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) Whether to hide data labels
         * that are outside the plot area. By default, the data label is moved
         * inside the plot area according to the overflow option.
         */
        crop?: boolean;
        /**
         * (Highcharts, Highstock, Gantt) Whether to defer displaying the data
         * labels until the initial series animation has finished. Setting to
         * `false` renders the data label immediately. If set to `true` inherits
         * the defer time set in plotOptions.series.animation.
         */
        defer?: boolean;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) Enable or disable the data
         * labels.
         */
        enabled?: boolean;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) A declarative filter to
         * control of which data labels to display. The declarative filter is
         * designed for use when callback functions are not available, like when
         * the chart options require a pure JSON structure or for use with
         * graphical editors. For programmatic control, use the `formatter`
         * instead, and return `undefined` to disable a single data label. (see
         * online documentation for example)
         */
        filter?: Highcharts.DataLabelsFilterOptionsObject;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) A format string for the data
         * label. Available variables are the same as for `formatter`.
         */
        format?: string;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) Callback JavaScript function
         * to format the data label. Note that if a `format` is defined, the
         * format takes precedence and the formatter is ignored.
         */
        formatter?: Highcharts.DataLabelsFormatterCallbackFunction;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) For points with an extent,
         * like columns or map areas, whether to align the data label inside the
         * box or to the actual value point. Defaults to `false` in most cases,
         * `true` in stacked columns.
         */
        inside?: boolean;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) The rank for this point's
         * data label in case of collision. If two data labels are about to
         * overlap, only the one with the highest `labelrank` will be drawn.
         */
        labelrank?: number;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) Format for points with the
         * value of null. Works analogously to format. `nullFormat` can be
         * applied only to series which support displaying null points.
         * `heatmap` and `tilemap` supports `nullFormat` by default while the
         * following series requires [#series.nullInteraction] set to `true`:
         * `line`, `spline`, `area`, `area-spline`, `column`, `bar`, and
         * `timeline`. Does not work with series that don't display null points,
         * like `pie`.
         */
        nullFormat?: (boolean|string);
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) Callback JavaScript function
         * that defines formatting for points with the value of null. Works
         * analogously to formatter. `nullFormatter` can be applied only to
         * series which support displaying null points. `heatmap` and `tilemap`
         * supports `nullFormatter` by default while the following series
         * requires (series.nullInteraction)[#series.nullInteraction] set to
         * `true`: `line`, `spline`, `area`, `area-spline`, `column`, `bar`, and
         * `timeline`. Does not work with series that don't display null points,
         * like `pie`.
         */
        nullFormatter?: Highcharts.DataLabelsFormatterCallbackFunction;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) How to handle data labels
         * that flow outside the plot area. The default is `"justify"`, which
         * aligns them inside the plot area. For columns and bars, this means it
         * will be moved inside the bar. To display data labels outside the plot
         * area, set `crop` to `false` and `overflow` to `"allow"`.
         */
        overflow?: Highcharts.DataLabelsOverflowValue;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) When either the
         * `borderWidth` or the `backgroundColor` is set, this is the padding
         * within the box.
         */
        padding?: number;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) Aligns data labels relative
         * to points. If `center` alignment is not possible, it defaults to
         * `right`.
         */
        position?: Highcharts.AlignValue;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) Text rotation in degrees.
         * Note that due to a more complex structure, backgrounds, borders and
         * padding will be lost on a rotated data label.
         */
        rotation?: number;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) The shadow of the box. Works
         * best with `borderWidth` or `backgroundColor`. Since 2.3 the shadow
         * can be an object configuration containing `color`, `offsetX`,
         * `offsetY`, `opacity` and `width`.
         */
        shadow?: (boolean|Highcharts.ShadowOptionsObject);
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) The name of a symbol to use
         * for the border around the label. Symbols are predefined functions on
         * the Renderer object.
         */
        shape?: string;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) Styles for the label. The
         * default `color` setting is `"contrast"`, which is a pseudo color that
         * Highcharts picks up and applies the maximum contrast to the
         * underlying point item, for example the bar in a bar chart.
         *
         * The `textOutline` is a pseudo property that applies an outline of the
         * given width with the given color, which by default is the maximum
         * contrast to the text. So a bright text color will result in a black
         * text outline for maximum readability on a mixed background. In some
         * cases, especially with grayscale text, the text outline doesn't work
         * well, in which cases it can be disabled by setting it to `"none"`.
         * When `useHTML` is true, the `textOutline` will not be picked up. In
         * this, case, the same effect can be achieved through the `text-shadow`
         * CSS property.
         *
         * For some series types, where each point has an extent, like for
         * example tree maps, the data label may overflow the point. There are
         * two strategies for handling overflow. By default, the text will wrap
         * to multiple lines. The other strategy is to set `style.textOverflow`
         * to `ellipsis`, which will keep the text on one line plus it will
         * break inside long words.
         */
        style?: Highcharts.CSSObject;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) Options for a label text
         * which should follow marker's shape. Border and background are
         * disabled for a label that follows a path.
         *
         * **Note:** Only SVG-based renderer supports this option. Setting
         * `useHTML` to true will disable this option.
         */
        textPath?: Highcharts.DataLabelsTextPathOptionsObject;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) Whether to use HTML to
         * render the labels.
         */
        useHTML?: boolean;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) The vertical alignment of a
         * data label. Can be one of `top`, `middle` or `bottom`. The default
         * value depends on the data, for instance in a column chart, the label
         * is above positive values and below negative values.
         */
        verticalAlign?: (Highcharts.VerticalAlignValue|null);
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) The x position offset of the
         * label relative to the point in pixels.
         */
        x?: number;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) The y position offset of the
         * label relative to the point in pixels.
         */
        y?: number;
    }
    /**
     * (Highcharts, Highstock, Gantt) Styles for the series label. The color
     * defaults to the series color, or a contrast color if `onArea`.
     */
    interface PlotVectorLabelStyleOptions {
        fontSize?: (number|string);
    }
    /**
     * (Highcharts, Highstock) Options for the _Series on point_ feature. Only
     * `pie` and `sunburst` series are supported at this moment.
     */
    interface PlotVectorOnPointOptions {
        /**
         * (Highcharts, Highstock) Options for the connector in the _Series on
         * point_ feature.
         *
         * In styled mode, the connector can be styled with the
         * `.highcharts-connector-seriesonpoint` class name.
         */
        connectorOptions?: (Highcharts.PlotVectorOnPointConnectorOptions|Highcharts.SVGAttributes);
        /**
         * (Highcharts, Highstock) The `id` of the point that we connect the
         * series to. Only points with a given `plotX` and `plotY` values and
         * map points are valid.
         */
        id?: string;
        /**
         * (Highcharts, Highstock) Options allowing to set a position and an
         * offset of the series in the _Series on point_ feature.
         */
        position?: (object|Highcharts.PlotVectorOnPointPositionOptions);
    }
    /**
     * (Highcharts, Highstock) A vector plot is a type of cartesian chart where
     * each point has an X and Y position, a length and a direction. Vectors are
     * drawn as arrows.
     *
     * Configuration options for the series are given in three levels:
     *
     * 1. Options for all series in a chart are defined in the
     * plotOptions.series object.
     *
     * 2. Options for all `vector` series are defined in plotOptions.vector.
     *
     * 3. Options for one single series are given in the series instance array.
     * (see online documentation for example)
     *
     * **TypeScript:**
     *
     * - type option should always be set, otherwise a broad set of unsupported
     * options is allowed.
     *
     * - when accessing an array of series, the combined set of all series types
     * is represented by Highcharts.SeriesOptionsType . Narrowing down to the
     * specific type can be done by checking the `type` property. (see online
     * documentation for example)
     */
    interface PlotVectorOptions {
        /**
         * (Highcharts, Highstock) Accessibility options for a series.
         */
        accessibility?: Highcharts.SeriesAccessibilityOptionsObject;
        /**
         * (Highcharts, Highstock) Allow this series' points to be selected by
         * clicking on the graphic (columns, point markers, pie slices, map
         * areas etc).
         *
         * The selected points can be handled by point select and unselect
         * events, or collectively by the getSelectedPoints function.
         *
         * And alternative way of selecting points is through dragging.
         */
        allowPointSelect?: boolean;
        /**
         * (Highcharts, Highstock) Enable or disable the initial animation when
         * a series is displayed. The animation can also be set as a
         * configuration object. Please note that this option only applies to
         * the initial animation of the series itself. For other animations, see
         * chart.animation and the animation parameter under the API methods.
         * The following properties are supported:
         *
         * - `defer`: The animation delay time in milliseconds.
         *
         * - `duration`: The duration of the animation in milliseconds.
         * (Defaults to `1000`)
         *
         * - `easing`: Can be a string reference to an easing function set on
         * the `Math` object or a function. See the _Custom easing function_
         * demo below. (Defaults to `easeInOutSine`)
         *
         * Due to poor performance, animation is disabled in old IE browsers for
         * several chart types.
         */
        animation?: (boolean|Highcharts.AnimationOptionsObject);
        /**
         * (Highcharts, Highstock) For some series, there is a limit that shuts
         * down animation by default when the total number of points in the
         * chart is too high. For example, for a column chart and its
         * derivatives, animation does not run if there is more than 250 points
         * totally. To disable this cap, set `animationLimit` to `Infinity`.
         * This option works if animation is fired on individual points, not on
         * a group of points like e.g. during the initial animation.
         */
        animationLimit?: number;
        /**
         * (Highcharts, Highstock) An additional class name to apply to the
         * series' graphical elements. This option does not replace default
         * class names of the graphical element. Changes to the series' color
         * will also be reflected in a chart's legend and tooltip.
         */
        className?: string;
        /**
         * (Highcharts, Highstock) Disable this option to allow series rendering
         * in the whole plotting area.
         *
         * **Note:** Clipping should be always enabled when chart.zoomType is
         * set
         */
        clip?: boolean;
        /**
         * (Highcharts, Highmaps) Options for marker clusters, the concept of
         * sampling the data values into larger blocks in order to ease
         * readability and increase performance of the JavaScript charts.
         *
         * Note: marker clusters module is not working with `boost` and
         * `draggable-points` modules.
         *
         * The marker clusters feature requires the marker-clusters.js file to
         * be loaded, found in the modules directory of the download package, or
         * online at code.highcharts.com/modules/marker-clusters.js.
         */
        cluster?: Highcharts.PlotVectorClusterOptions;
        /**
         * (Highcharts, Highstock) The main color of the series. In line type
         * series it applies to the line and the point markers unless otherwise
         * specified. In bar type series it applies to the bars unless a color
         * is specified per point. The default value is pulled from the
         * `options.colors` array.
         *
         * In styled mode, the color can be defined by the colorIndex option.
         * Also, the series color can be set with the `.highcharts-series`,
         * `.highcharts-color-{n}`, `.highcharts-{type}-series` or
         * `.highcharts-series-{n}` class, or individual classes given by the
         * `className` option.
         */
        color?: Highcharts.ColorType;
        /**
         * (Highcharts, Highstock, Highmaps) When using dual or multiple color
         * axes, this number defines which colorAxis the particular series is
         * connected to. It refers to either the axis id or the index of the
         * axis in the colorAxis array, with 0 being the first. Set this option
         * to false to prevent a series from connecting to the default color
         * axis.
         *
         * Since v7.2.0 the option can also be an axis id or an axis index
         * instead of a boolean flag.
         */
        colorAxis?: (boolean|number|string);
        /**
         * (Highcharts, Highstock) Styled mode only. A specific color index to
         * use for the series, so its graphic representations are given the
         * class name `highcharts-color-{n}`.
         *
         * Since v11, CSS variables on the form `--highcharts-color-{n}` make
         * changing the color scheme very convenient.
         */
        colorIndex?: number;
        /**
         * (Highcharts, Highstock, Highmaps) Determines what data value should
         * be used to calculate point color if `colorAxis` is used. Requires to
         * set `min` and `max` if some custom point property is used or if
         * approximation for data grouping is set to `'sum'`.
         */
        colorKey?: string;
        /**
         * (Highstock) Compare the values of the series against the first
         * non-null, non- zero value in the visible range. The y axis will show
         * percentage or absolute change depending on whether `compare` is set
         * to `"percent"` or `"value"`. When this is applied to multiple series,
         * it allows comparing the development of the series against each other.
         * Adds a `change` field to every point object. If a `compare` value is
         * not set on a linked series, it will be inherited from the parent
         * series.
         */
        compare?: Highcharts.OptionsCompareValue;
        /**
         * (Highstock) When compare is `percent`, this option dictates whether
         * to use 0 or 100 as the base of comparison.
         */
        compareBase?: (0|100);
        /**
         * (Highstock) Defines if comparison should start from the first point
         * within the visible range or should start from the last point
         * **before** the range.
         *
         * In other words, this flag determines if first point within the
         * visible range will have 0% (`compareStart=true`) or should have been
         * already calculated according to the previous point
         * (`compareStart=false`).
         */
        compareStart?: boolean;
        /**
         * (Highcharts, Highstock, Gantt) When true, each point or column edge
         * is rounded to its nearest pixel in order to render sharp on screen.
         * In some cases, when there are a lot of densely packed columns, this
         * leads to visible difference in column widths or distance between
         * columns. In these cases, setting `crisp` to `false` may look better,
         * even though each column is rendered blurry.
         */
        crisp?: boolean;
        /**
         * (Highstock) Cumulative Sum feature replaces points' values with the
         * following formula: `sum of all previous points' values + current
         * point's value`. Works only for points in a visible range. Adds the
         * `cumulativeSum` field to each point object that can be accessed e.g.
         * in the tooltip.pointFormat.
         *
         * With `dataGrouping` enabled, default grouping approximation is set to
         * `sum`.
         */
        cumulative?: boolean;
        /**
         * (Highstock) Defines if cumulation should start from the first point
         * within the visible range or should start from the last point
         * **before** the range.
         *
         * In other words, this flag determines if first point within the
         * visible range will start at 0 (`cumulativeStart=true`) or should have
         * been already calculated according to the previous point
         * (`cumulativeStart=false`).
         */
        cumulativeStart?: boolean;
        /**
         * (Highcharts, Highstock) You can set the cursor to "pointer" if you
         * have click events attached to the series, to signal to the user that
         * the points and lines can be clicked.
         *
         * In styled mode, the series cursor can be set with the same classes as
         * listed under series.color.
         */
        cursor?: (string|Highcharts.CursorValue);
        /**
         * (Highcharts, Highstock) A reserved subspace to store options and
         * values for customized functionality. Here you can add additional data
         * for your own event callbacks and formatter callbacks.
         */
        custom?: Highcharts.Dictionary<any>;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) Options for the series data
         * labels, appearing next to each data point.
         *
         * Since v6.2.0, multiple data labels can be applied to each single
         * point by defining them as an array of configs.
         *
         * In styled mode, the data labels can be styled with the
         * `.highcharts-data-label-box` and `.highcharts-data-label` class names
         * (see example).
         */
        dataLabels?: (Highcharts.PlotVectorDataLabelsOptions|Array<Highcharts.PlotVectorDataLabelsOptions>);
        /**
         * (Highcharts, Highstock) Options for the series data sorting.
         */
        dataSorting?: (Highcharts.DataSortingOptionsObject|Highcharts.PlotVectorDataSortingOptions);
        /**
         * (Highcharts, Highstock) Deprecated. Use
         * plotOptions.series.accessibility.description instead.
         *
         * A description of the series to add to the screen reader information
         * about the series.
         *
         * @deprecated 8.0.0
         */
        description?: string;
        /**
         * (Highcharts, Highstock) Enable or disable the mouse tracking for a
         * specific series. This includes point tooltips and click events on
         * graphs and points. For large datasets it improves performance.
         */
        enableMouseTracking?: boolean;
        /**
         * (Highcharts, Highstock) General event handlers for the series items.
         * These event hooks can also be attached to the series at run time
         * using the `Highcharts.addEvent` function.
         */
        events?: Highcharts.SeriesEventsOptionsObject;
        /**
         * (Highcharts, Highstock) Determines whether the series should look for
         * the nearest point in both dimensions or just the x-dimension when
         * hovering the series. Defaults to `'xy'` for scatter series and `'x'`
         * for most other series. If the data has duplicate x-values, it is
         * recommended to set this to `'xy'` to allow hovering over all points.
         *
         * Applies only to series types using nearest neighbor search (not
         * direct hover) for tooltip.
         */
        findNearestPointBy?: Highcharts.OptionsFindNearestPointByValue;
        /**
         * (Highcharts, Highstock, Gantt) Whether to use the Y extremes of the
         * total chart width or only the zoomed area when zooming in on parts of
         * the X axis. By default, the Y axis adjusts to the min and max of the
         * visible data. Cartesian series only.
         */
        getExtremesFromAll?: boolean;
        /**
         * (Highcharts, Highstock) Highlight only the hovered point and fade the
         * remaining points.
         *
         * Scatter-type series require enabling the 'inactive' marker state and
         * adjusting opacity. Note that this approach could affect performance
         * with large datasets.
         */
        inactiveOtherPoints?: boolean;
        /**
         * (Highcharts, Highstock) When set to `false` will prevent the series
         * data from being included in any form of data export.
         *
         * Since version 6.0.0 until 7.1.0 the option was existing undocumented
         * as `includeInCSVExport`.
         */
        includeInDataExport?: boolean;
        /**
         * (Highcharts, Highstock) An array specifying which option maps to
         * which key in the data point array. This makes it convenient to work
         * with unstructured data arrays from different sources.
         */
        keys?: Array<string>;
        /**
         * (Highcharts, Highstock, Gantt) Series labels are placed as close to
         * the series as possible in a natural way, seeking to avoid other
         * series. The goal of this feature is to make the chart more easily
         * readable, like if a human designer placed the labels in the optimal
         * position.
         *
         * The series labels currently work with series types having a `graph`
         * or an `area`.
         */
        label?: Highcharts.SeriesLabelOptionsObject;
        /**
         * (Highstock) The line marks the last price from all points.
         */
        lastPrice?: Highcharts.SeriesLastPriceOptionsObject;
        /**
         * (Highstock) The line marks the last price from visible range of
         * points.
         */
        lastVisiblePrice?: Highcharts.SeriesLastVisiblePriceOptionsObject;
        /**
         * (Highcharts, Highstock) What type of legend symbol to render for this
         * series. Can be one of `areaMarker`, `lineMarker` or `rectangle`.
         */
        legendSymbol?: Highcharts.OptionsLegendSymbolValue;
        /**
         * (Highcharts, Highstock) The line width for each vector arrow.
         */
        lineWidth?: number;
        /**
         * (Highcharts, Highstock, Gantt) The id of another series to link to.
         * Additionally, the value can be ":previous" to link to the previous
         * series. When two series are linked, only the first one appears in the
         * legend. Toggling the visibility of this also toggles the linked
         * series.
         *
         * If master series uses data sorting and linked series does not have
         * its own sorting definition, the linked series will be sorted in the
         * same order as the master one.
         *
         * If a `compare` value is not set on a linked series, it will be
         * inherited from the parent series.
         */
        linkedTo?: string;
        marker?: string;
        /**
         * (Highstock) Options for the corresponding navigator series if
         * `showInNavigator` is `true` for this series. Available options are
         * the same as any series, documented at plotOptions and series.
         *
         * These options are merged with options in navigator.series, and will
         * take precedence if the same option is defined both places.
         */
        navigatorOptions?: Highcharts.PlotSeriesOptions;
        /**
         * (Highcharts, Highstock) The color for the parts of the graph or
         * points that are below the threshold. Note that `zones` takes
         * precedence over the negative color. Using `negativeColor` is
         * equivalent to applying a zone with value of 0.
         */
        negativeColor?: Highcharts.ColorType;
        /**
         * (Highcharts, Highstock) Whether or not data-points with the value of
         * `null` should be interactive. When this is set to `true`, tooltips
         * may highlight these points, and this option also enables keyboard
         * navigation for such points. Format options for such points include
         * `nullFormat` and `nullFormatter`. Works for these series: `line`,
         * `spline`, `area`, `area-spline`, `column`, `bar`, and `timeline`.
         */
        nullInteraction?: (boolean|undefined);
        /**
         * (Highcharts, Highstock) Options for the _Series on point_ feature.
         * Only `pie` and `sunburst` series are supported at this moment.
         */
        onPoint?: (object|Highcharts.PlotVectorOnPointOptions);
        /**
         * (Highcharts, Highstock) Opacity of a series parts: line, fill (e.g.
         * area) and dataLabels.
         */
        opacity?: number;
        /**
         * (Highcharts, Highstock) Properties for each single point.
         */
        point?: Highcharts.PlotSeriesPointOptions;
        /**
         * (Highcharts, Highstock) Deprecated. Use
         * series.accessibility.point.descriptionFormat instead.
         *
         * Same as accessibility.point.descriptionFormat, but for an individual
         * series. Overrides the chart wide configuration.
         */
        pointDescriptionFormat?: Function;
        /**
         * (Highcharts, Highstock) Deprecated. Use
         * series.accessibility.point.descriptionFormatter instead.
         *
         * Same as accessibility.series.descriptionFormatter, but for an
         * individual series. Overrides the chart wide configuration.
         *
         * @deprecated 8.0.0
         */
        pointDescriptionFormatter?: Function;
        /**
         * (Highcharts, Highstock, Gantt) If no x values are given for the
         * points in a series, `pointInterval` defines the interval of the x
         * values. For example, if a series contains one value every decade
         * starting from year 0, set `pointInterval` to `10`. In true `datetime`
         * axes, the `pointInterval` is set in milliseconds.
         *
         * It can be also be combined with `pointIntervalUnit` to draw irregular
         * time intervals.
         *
         * If combined with `relativeXValue`, an x value can be set on each
         * point, and the `pointInterval` is added x times to the `pointStart`
         * setting.
         *
         * Please note that this options applies to the _series data_, not the
         * interval of the axis ticks, which is independent.
         */
        pointInterval?: number;
        /**
         * (Highcharts, Highstock, Gantt) On datetime series, this allows for
         * setting the pointInterval to irregular time units, `day`, `month` and
         * `year`. A day is usually the same as 24 hours, but
         * `pointIntervalUnit` also takes the DST crossover into consideration
         * when dealing with local time. Combine this option with
         * `pointInterval` to draw weeks, quarters, 6 months, 10 years etc.
         *
         * Please note that this options applies to the _series data_, not the
         * interval of the axis ticks, which is independent.
         */
        pointIntervalUnit?: Highcharts.OptionsPointIntervalUnitValue;
        /**
         * (Highstock) The width of each point on the x axis. For example in a
         * column chart with one value each day, the pointRange would be 1 day
         * (= 24 * 3600
         *
         * * 1000 milliseconds). This is normally computed automatically, but
         * this option can be used to override the automatic value.
         */
        pointRange?: number;
        /**
         * (Highcharts, Highstock, Gantt) If no x values are given for the
         * points in a series, `pointStart` defines on what value to start. For
         * example, if a series contains one yearly value starting from 1945,
         * set `pointStart` to 1945.
         *
         * The `pointStart` setting can be a number, or a datetime string that
         * is parsed according to the `time.timezone` setting.
         *
         * If combined with `relativeXValue`, an x value can be set on each
         * point. The x value from the point options is multiplied by
         * `pointInterval` and added to `pointStart` to produce a modified x
         * value.
         */
        pointStart?: (number|string);
        /**
         * (Highcharts, Highstock) When true, X values in the data set are
         * relative to the current `pointStart`, `pointInterval` and
         * `pointIntervalUnit` settings. This allows compression of the data for
         * datasets with irregular X values.
         *
         * The real X values are computed on the formula `f(x) = ax + b`, where
         * `a` is the `pointInterval` (optionally with a time unit given by
         * `pointIntervalUnit`), and `b` is the `pointStart`.
         */
        relativeXValue?: boolean;
        /**
         * (Highcharts, Highstock) What part of the vector it should be rotated
         * around. Can be one of `start`, `center` and `end`. When `start`, the
         * vectors will start from the given [x, y] position, and when `end` the
         * vectors will end in the [x, y] position.
         */
        rotationOrigin?: Highcharts.OptionsRotationOriginValue;
        /**
         * (Highcharts, Highstock) Whether to select the series initially. If
         * `showCheckbox` is true, the checkbox next to the series name in the
         * legend will be checked for a selected series.
         */
        selected?: boolean;
        /**
         * (Highcharts, Highstock) If true, a checkbox is displayed next to the
         * legend item to allow selecting the series. The state of the checkbox
         * is determined by the `selected` option.
         */
        showCheckbox?: boolean;
        /**
         * (Highcharts, Highstock) Whether to display this particular series or
         * series type in the legend. Standalone series are shown in legend by
         * default, and linked series are not. Since v7.2.0 it is possible to
         * show series that use colorAxis by setting this option to `true`.
         */
        showInLegend?: boolean;
        /**
         * (Highstock) Whether or not to show the series in the navigator. Takes
         * precedence over navigator.baseSeries if defined.
         */
        showInNavigator?: boolean;
        /**
         * (Highcharts, Highstock) Deprecated. Use
         * series.accessibility.keyboardNavigation instead.
         *
         * If set to `true`, the accessibility module will skip past the points
         * in this series for keyboard navigation.
         *
         * @deprecated 8.0.0
         */
        skipKeyboardNavigation?: boolean;
        /**
         * (Highcharts, Highstock) When this is true, the series will not cause
         * the Y axis to cross the zero plane (or threshold option) unless the
         * data actually crosses the plane.
         *
         * For example, if `softThreshold` is `false`, a series of 0, 1, 2, 3
         * will make the Y axis show negative values according to the
         * `minPadding` option. If `softThreshold` is `true`, the Y axis starts
         * at 0.
         */
        softThreshold?: boolean;
        /**
         * (Highcharts, Highstock) Sonification/audio chart options for a
         * series.
         */
        sonification?: Highcharts.SeriesSonificationOptions;
        /**
         * (Highcharts, Highstock) A collection of options for different series
         * states.
         */
        states?: Highcharts.SeriesStatesOptionsObject;
        /**
         * (Highcharts, Highstock, Highmaps) Sticky tracking of mouse events.
         * When true, the `mouseOut` event on a series isn't triggered until the
         * mouse moves over another series, or out of the plot area. When false,
         * the `mouseOut` event on a series is triggered when the mouse leaves
         * the area around the series' graph or markers. This also implies the
         * tooltip. When `stickyTracking` is false and `tooltip.shared` is
         * false, the tooltip will be hidden when moving the mouse between
         * series.
         */
        stickyTracking?: boolean;
        /**
         * (Highcharts, Highstock) The threshold, also called zero level or base
         * level. For line type series this is only used in conjunction with
         * negativeColor.
         */
        threshold?: (number|null);
        /**
         * (Highcharts, Highstock, Highmaps) A configuration object for the
         * tooltip rendering of each single series. Properties are inherited
         * from tooltip. Overridable properties are `headerFormat`,
         * `pointFormat`, `yDecimals`, `xDateFormat`, `yPrefix` and `ySuffix`.
         * Unlike other series, in a scatter plot the series.name by default
         * shows in the headerFormat and point.x and point.y in the pointFormat.
         */
        tooltip?: Highcharts.SeriesTooltipOptionsObject;
        /**
         * (Highcharts, Highstock, Gantt) When a series contains a `data` array
         * that is longer than this, the Series class looks for data
         * configurations of plain numbers or arrays of numbers. The first and
         * last valid points are checked. If found, the rest of the data is
         * assumed to be the same. This saves expensive data checking and
         * indexing in long series, and makes data-heavy charts render faster.
         *
         * Set it to `0` disable.
         *
         * Note:
         *
         * - In boost mode turbo threshold is forced. Only array of numbers or
         * two dimensional arrays are allowed.
         *
         * - In version 11.4.3 and earlier, if object configurations were passed
         * beyond the turbo threshold, a warning was logged in the console and
         * the data series didn't render.
         */
        turboThreshold?: number;
        /**
         * (Highcharts, Highstock) Maximum length of the arrows in the vector
         * plot. The individual arrow length is computed between 0 and this
         * value.
         */
        vectorLength?: number;
        /**
         * (Highcharts, Highstock) Set the initial visibility of the series.
         */
        visible?: boolean;
        /**
         * (Highcharts, Highstock) Defines the Axis on which the zones are
         * applied.
         */
        zoneAxis?: string;
        /**
         * (Highcharts, Highstock) An array defining zones within a series.
         * Zones can be applied to the X axis, Y axis or Z axis for bubbles,
         * according to the `zoneAxis` option. The zone definitions have to be
         * in ascending order regarding to the value.
         *
         * In styled mode, the color zones are styled with the
         * `.highcharts-zone-{n}` class, or custom classed from the `className`
         * option (view live demo).
         */
        zones?: Array<Highcharts.SeriesZonesOptionsObject>;
        /**
         * (Highcharts, Highstock) Whether to zoom non-cartesian series. If
         * `chart.zooming` is set, the option allows to disable zooming on an
         * individual non-cartesian series. By default zooming is enabled for
         * all series.
         *
         * **Note**: This option works only for non-cartesian series.
         */
        zoomEnabled?: boolean;
    }
    /**
     * (Highcharts, Highstock) Animation when not hovering over the marker.
     */
    interface PlotVectorStatesInactiveAnimationOptions {
        duration?: number;
    }
    /**
     * (Highcharts, Highstock, Highmaps) Positioning options for fixed tooltip,
     * taking effect only when tooltip.fixed is `true`.
     */
    interface PlotVectorTooltipPositionOptions {
        /**
         * (Highcharts, Highstock, Highmaps) The horizontal alignment of the
         * fixed tooltip.
         */
        align?: Highcharts.AlignValue;
        /**
         * (Highcharts, Highstock, Highmaps) What the fixed tooltip alignment
         * should be relative to.
         *
         * The default, `pane`, means that it is aligned within the plot area
         * for that given series. If the tooltip is split (as default in Stock
         * charts), each partial tooltip is aligned within the series' pane.
         */
        relativeTo?: Highcharts.OptionsRelativeToValue;
        /**
         * (Highcharts, Highstock, Highmaps) The vertical alignment of the fixed
         * tooltip.
         */
        verticalAlign?: Highcharts.VerticalAlignValue;
        /**
         * (Highcharts, Highstock, Highmaps) X pixel offset from the given
         * position. Can be used to shy away from axis lines, grid lines etc to
         * avoid the tooltip overlapping other elements.
         */
        x?: number;
        /**
         * (Highcharts, Highstock, Highmaps) Y pixel offset from the given
         * position. Can be used to shy away from axis lines, grid lines etc to
         * avoid the tooltip overlapping other elements.
         */
        y?: number;
    }
    /**
     * (Highcharts, Highstock, Gantt) Enable or disable the initial animation
     * when a series is displayed for the `dataLabels`. The animation can also
     * be set as a configuration object. Please note that this option only
     * applies to the initial animation.
     *
     * For other animations, see chart.animation and the animation parameter
     * under the API methods. The following properties are supported:
     *
     * - `defer`: The animation delay time in milliseconds.
     */
    interface SeriesVectorDataDataLabelsAnimationOptions {
        /**
         * (Highcharts, Highstock, Gantt) The animation delay time in
         * milliseconds. Set to `0` to render the data labels immediately. As
         * `undefined` inherits defer time from the series.animation.defer.
         */
        defer?: number;
    }
    /**
     * (Highcharts, Highstock) A `vector` series. If the type option is not
     * specified, it is inherited from chart.type.
     *
     * Configuration options for the series are given in three levels:
     *
     * 1. Options for all series in a chart are defined in the
     * plotOptions.series object.
     *
     * 2. Options for all `vector` series are defined in plotOptions.vector.
     *
     * 3. Options for one single series are given in the series instance array.
     * (see online documentation for example)
     *
     * **TypeScript:**
     *
     * - type option should always be set, otherwise a broad set of unsupported
     * options is allowed.
     *
     * - when accessing an array of series, the combined set of all series types
     * is represented by Highcharts.SeriesOptionsType . Narrowing down to the
     * specific type can be done by checking the `type` property. (see online
     * documentation for example)
     *
     * You have to extend the `SeriesVectorOptions` via an interface to allow
     * custom properties: ``` declare interface SeriesVectorOptions {
     * customProperty: string; }
     *
     */
    interface SeriesVectorOptions extends Highcharts.PlotVectorOptions, Highcharts.SeriesOptions {
        /**
         * (Highcharts, Highstock) An array of data points for the series. For
         * the `vector` series type, points can be given in the following ways:
         *
         * 1. An array of arrays with 4 values. In this case, the values
         * correspond to to `x,y,length,direction`. If the first value is a
         * string, it is applied as the name of the point, and the `x` value is
         * inferred. (see online documentation for example)
         *
         * 2. An array of objects with named values. The following snippet shows
         * only a few settings, see the complete options set below. If the total
         * number of data points exceeds the series' turboThreshold, this option
         * is not available. (see online documentation for example)
         */
        data?: Array<([(number|string), number, number, number]|Highcharts.PointOptionsObject)>;
        /**
         * Not available
         */
        dataParser?: undefined;
        /**
         * Not available
         */
        dataURL?: undefined;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) This property is only in
         * TypeScript non-optional and might be `undefined` in series objects
         * from unknown sources.
         */
        type: "vector";
    }
}
